First-principles Study Research Articles

Biaxila strain modulated high anisotropic gas-sensing performance of C5N-based two-dimensional devices: A first-principles study

Two-dimensional carbon nitride materials have been widely used in many applications such as device fabrication, gas adsorption and separation due to their abundant element resources, high physicochemical stability and excellent electronic properties. In this paper, density functional theory and non-equilibrium Green's function method are used to study the electronic structure, transport characteristics and gas sensitivity of C5N-based structures. The results show that the electron transport exhibits obvious anisotropy, in which the electron transport in the armchair direction is more conductive than that in the zigzag direction. It is worth noting that the negative differential resistance effect exists in both directions. Furthermore, the transport and sensing characteristics of inorganic molecules (NO, CO, NO2, SO2, and NH3) adsorbed on the C5N monolayer are studied. The results show that CO, SO2 and NH3 exist on the surface of C5N in the form of physical adsorption, while NO and NO2 adhere to the surface of C5N in the form of chemical adsorption. The designed C5N gas sensor exhibits high sensitivity to NO and NO2 molecules, reaching 81 % sensitivity to NO2 at a 0.1 V bias voltage. Finally, the effect of strain on the adsorption properties of gas sensing devices is studied. Studies have shown that the application of -4 % strain in the armchair direction significantly increases the current of NO and NO2, significantly improving the performance of the gas sensor. Whether strain is applied to the device or gas adsorption, C5N materials always maintain significant anisotropy. This study shows that C5N is a highly anisotropic and sensitive two-dimensional material, which has broad application potential in the field of electronic properties and gas sensing.

Strain-tunable elastic, electronic, and thermal transport properties of two-dimensional CaI2 monolayer: A first-principles study

Despite the increasing attention on two-dimensional (2D) metal iodides in recent years for their appropriate bandgaps and exceptional optical properties, there is limited understanding of their intriguing thermal transport properties. Here, the strain-tunable mechanic, electronic, and transport properties of the monolayer CaI2 are calculated in detail by combining first-principles calculations with Boltzmann transport theory. We have checked its thermal, dynamic, and mechanical stability by computing ab-initio molecular dynamics, phonon spectra and elastic constants, respectively. The calculation results from the PBE-GGA and HSE06 methods indicate that the monolayer CaI2 is an indirect semiconductor, with band gaps of 3.92 eV and 5.12 eV, respectively. Additionally, the effective masses and Fermi velocities for both holes and electrons are also obtained, which indicates that the monolayer CaI2 owns the excellent electronic transport property. These mechanical constants and electronic parameters are also highly sensitive to the external strain. The calculated real lattice thermal conductivity of the monolayer CaI2 at 300 K is about 1.01 W/mK, which is rather low among 2D materials, implying its potential application in heat insulation materials or thermal insulation material. With the biaxial tensile strain increasing, its lattice thermal conductivity would further decrease. The difference in lattice thermal conductivities between 0 % and 2 % strain, as well as between 4 % and 6 % strain, is much smaller than that between 2 % and 4 % strains. Subsequently, the group velocities, phonon scattering rates, and cumulative lattice thermal conductivities of the monolayer CaI2 are discussed under the different strains.

Current-induced spin polarization in chiral tellurium: A first-principles quantum transport study

Current-induced spin polarization in chiral tellurium: A first-principles quantum transport study

Influence of interposed graphene sheets on mechanical and electronic properties of Al/graphene superlattice

Graphene-reinforced aluminum matrix composites have drawn remarkable attention in several fields of high-tech industries, but the understanding of their material properties remains unclear. This work reports a first-principles study of interface binding nature, mechanical strength, and electronic properties of aluminum/graphene (Al/G) composites using superlattice models as varying graphene content. Our calculations reveal the weak binding between Al and graphene layers with no new chemical bonding at the interface and the gradual decrease in binding strength as increasing graphene content. While demonstrating the enhancement of mechanical strength by interposing graphene layers, the critical value of graphene content for keeping ductility is determined to be 14.7%. Atom-projected band structures and local density of states are analyzed to get an insight into electronic conductance of superlattices.

First-Principles Study of the Electronic and Optical Properties of Sn-BeO Heterostructure

First-Principles Study of the Electronic and Optical Properties of Sn-BeO Heterostructure

First-Principles Study on Valley Polarization of Ferromagnetic PrBr2 Monolayer under Strain

First-Principles Study on Valley Polarization of Ferromagnetic PrBr₂ Monolayer under Strain

First-principles study on edge-edge interactions of bilayer zigzag SiC nanoribbons

Abstract We have identified a complex interplay of van der Waals (vdW), coulombic, and direct edge-to-edge covalent interactions as key factors in determining the stability of bilayer zigzag SiC nanoribbons (ZSiCNRs). The Si-Si edge of the homo-AA-stacked ZSiCNR displays a unique bond angle, indicative of sp3-like covalent bonds. In contrast, the C-C edge shows a flat structure, suggesting a formation of the pseudo-chemical bonding between pz orbitals at the edge like bilayer graphene NRs. The homo-AA-stacked ZSiCNR is nonmagnetic and metallic, although the monolayer ZSiCNR exhibits magnetic properties due to spin-polarized pz orbitals localized at the edge Si and C atoms. In contrast, the hetero-AA-stacked ZSiCNR is more stable than the homo one and is indicative of semiconductor properties with a finite band gap, since the topology of the edge states originating from pz orbitals is no longer preserved.

First-principles study of the elastic tensor of GaP at high electronic temperature

First-principles study of the elastic tensor of GaP at high electronic temperature

A First-principles study of HfB2 anisotropic surface stability and its oxygen adsorption behavior

Abstract In this work, the HfB2 anisotropic surface stability, and the adsorption and diffusion behavior of oxygen molecule on the most likely exposed HfB2 surface were investigated based on density functional theory. The study found that the HfB2(0001) surface terminated by Hf (labeled as: Hf-(0001)) is more stable and more likely interact with oxygen. By rotating the oxygen molecule orientation and changing the adsorption site, all possible high and low-symmetry adsorption configurations are considered. The results show that the low symmetry structure is unstable, and eventually turn into the high symmetry ones. For the highly symmetric structures, oxygen molecule tends to be adsorbed in parallel, and the dissociated oxygen molecule tends to be located at the bridge and hollow site of the Hf-(0001) surface, and there is no energy barrier to this process. Charge density difference and Partial density of states proved that three absorbed structures present similar electronic interaction characteristics, and oxygen adsorption mainly affects the Hf atom at the outmost layer of the Hf-(0001) plane. Oxygen atoms bind to the Hf-(0001) surface mainly in the form of ionic bonds and covalent bonds, originating from the orbital hybridization of O-p and Hf-d. The oxidation of HfB2 starts from the interaction between oxygen and Hf.

Effect of metal (Cr, Sr, Ag, Cu) doping on the performance of lead-free RbSnI3 based perovskite solar cells: A theoretical approach

Perovskite solar cells based on lead have witnessed unprecedented growth over the past decade, achieving an impressive power conversion efficiency (PCE) of 26.1%. However, lead toxicity remains a concern for commercialization. In order to resolve the matter, scientists have been investigating alternative materials; in this context, rubidium-based lead-free perovskites like RbSnI3 may be a promising alternative because it has a high optical conductivity and absorption coefficient. Density Functional Theory (DFT)-based first-principles studies are used in this work to examine the effect of metal doping (specifically Cr, Sr, Ag, and Cu) on the optoelectronic and structural characteristics of orthorhombic RbSnI3 perovskite. In addition, we conducted a comprehensive study to investigate the impact of metal doping on the formation energy, structural stability, and HOMO–LUMO energy levels of RbSnI3 perovskite. Introducing transition metal cations (Cr2+, Ag+, and Cu+) at the Rb site results in a flat band in the conduction band region, transforming the RbSnI3’s indirect band gap into a direct one and significantly affecting the optoelectronic properties. The DFT results are then integrated into the Solar Cell Capacitance Simulator (SCAPS-1D) to estimate the effectiveness of the modeled device. The Cu-doped RbSnI3 device exhibits the highest PCE of 20.2%. Furthermore, Ag and Cu doping in RbSnI3 increases bond length, which reduces exciton binding energy and helps with charge carrier generation.

Speed of sound in dense strong-interaction matter

We study the speed of sound in strong-interaction matter at zero temperature and in density regimes which are expected to be governed by the presence of a color-superconducting gap. At (very) high densities, our analysis indicates that the speed of sound approaches its asymptotic value associated with the non-interacting quark gas from below, in agreement with first-principles studies which do not take the presence of a color-superconducting gap into account. Towards lower densities, however, the presence of a gap induces an increase of the speed of sound above its asymptotic value. Importantly, even if gap-induced corrections to the pressure may appear small, we find that derivatives of the gap with respect to the chemical potential can still be sizeable and lead to a qualitative change of the density dependence of the speed of sound. Taking into account constraints on the density dependence of the speed of sound at low densities, our general considerations suggest the existence of a maximum in the speed of sound. Interestingly, we also observe that specific properties of the gap can be related to characteristic properties of the speed of sound which are indirectly constrained by observations.

The role of graphene in SnS2@Graphene for rechargeable lithium batteries: A view from the electronic structure

Based on the first-principles study, the adsorption and electron transfer properties of Li atom at different sites of SnS2 monolayer, SnS2@Graphene 2D-nanocomposite are analyzed. The differential charge density and density of states (DOS) analysis show that the graphene substrate as an electron donor can change the 2D-nanocomposite from a semiconductor to a metal, and reduce the adsorption energy of Li atom by decreasing the charge transferring from Li atom to SnS2. This indicates that graphene substrate is beneficial for improving the performance of SnS2@Graphene. Meanwhile, the Li atoms tend not to cluster on the SnS2@Graphene 2D-nanocomposite, which is useful to prolong the lifespan of the SnS2@Graphene. The functionality of graphene in SnS2@Graphene 2D-nanocomposite is proved by other electron donor substrates, such as a two-H-atom model and a Sn (111) substrate model. All the results indicate that the graphene, as an electron donor in SnS2@Graphene 2D-nanocomposite, plays a key role in improving the performance of SnS2 in rechargeable lithium batteries.

Structural, Opto-Electronic and Magneto-Elastic Properties of Tetra One Type Layered EuCuFS/Se Magnetic Semiconductor for Diverse Applications: A First-Principles Study

Structural, Opto-Electronic and Magneto-Elastic Properties of Tetra One Type Layered EuCuFS/Se Magnetic Semiconductor for Diverse Applications: A First-Principles Study

Pressure induced formation of KrO2 from first-principles study

Pressure induced formation of KrO₂ from first-principles study

Piezoelectric characteristics of doped β-Ga2O3 monolayer: a first-principles study

Two-dimensional (2D) piezoelectric materials have been widely concerned because of their important applications in nano-piezoelectric generators. Finding two-dimensional materials with large piezoelectric effects is still a great challenge. In this work, the inversion center of the β-Ga2O3 monolayer was broken by substitutional doping. Not only the in-plane piezoelectric effect but also the uncommon out-of-plane piezoelectric effect is induced in the doped β-Ga2O3 monolayer. In addition, we analyzed the cause of the piezoelectric effects from their electronic properties. The values of out-of-plane (in-plane) piezoelectric coefficient for Cu-doped and Al-doped β-Ga2O3 reach −4.04 (3.95) pm/V and −2.91 (0.37) pm/V, respectively. The results are comparable with those of the commonly used bulk piezoelectric materials such as α-quartz (d11 = 2.3 pm V−1), AlN (d33 = 5.1 pm V−1), and GaN (d33 = 3.1 pm V−1), even though they are both two-dimensional structures. Our study shows a great potential application of doped β-Ga2O3 monolayer in micro and nano-electromechanical devices such as smart wearables, sensors, energy converters, and micro energy collectors.

Functionalized MBenes as promising anode materials for high-performance alkali-ion batteries: a first-principles study.

The discovery of novel electrode materials based on two-dimensional (2D) structures is critical for alkali metal-ion batteries. Herein, we performed first-principles computations to investigate functionalized MXenes, Mo2BT2 (T=O, S), which are also regarded as B-based MXenes, or named as MBenes, as potential anode materials for Li-ion batteries and beyond. The pristine and T-terminated Mo2BT2 (T=O, S) monolayers reveal metallic character with higher electronic conductivity and are thermodynamically stable with an intrinsic dipole moment. Both Mo2BO2 and Mo2BS2 monolayers exhibit high theoretical Li/Na/K storage capacity and low ion diffusion barriers. These findings suggest that functionalized Mo2BT2 (T=O, S) monolayers are promising for designing viable anode materials for high-performance alkali-ion batteries.

Short-range-order degree dominated physical and mechanical properties of refractory multi-principal element alloys: A first-principles study

Abstract The degree of short-range order (SRO) can influence the physical and mechanical properties of refractory multi-principal element alloys (RMPEAs). Here, the effect of SRO degree on the atomic configuration and properties of the equiatomic TiTaZr RMPEA is investigated using the first-principles calculations. Their key roles on the lattice parameter, binding energy, elastic properties, electronic structure, and stacking fault energy (SFE) are analyzed. The results show the degree of SRO has a significant effect on the physical and mechanical properties of TiTaZr. During the SRO degree increasing in TiTaZr lattice, the low SRO degree exacerbates the lattice distortion and the high SRO degree reduces the lattice distortion. The high degree of SRO improves the binding energy and elastic stiffness of the TiTaZr. By analyzing the change in charge density, this change is caused by the atomic bias generated during the formation of the SRO, which leading to a change in charge-density thereby affecting the metal bond polarity and inter-atomic forces. The high SRO degree also reduces SFE, which means the capability of plastic deformation of the TiTaZr is enhanced.

First-principles study of behaviors of point defects in Mo-14 Re alloy

Molybdenum alloys with rhenium additions of 14 % (Mo-14 Re) are regarded as structural materials for advanced nuclear reactors. The performance of Mo-14 Re alloy under irradiation is crucial for its application. Irradiation performance is related to the behaviors of point defects produced by irradiation. The behaviors of point defects in Mo-14 Re alloy were investigated using first-principles methods in this work. Compared with the results in pure Mo alloy, the formation energy and the migration energy of vacancy in Mo-14 Re were both reduced, and the migration energy of interstitial dumbbell increased while the formation energy decreased in Mo-14 Re. In Mo-14 Re, vacancy preferred to form and diffuse faster in Re-enriched environment. Knowing the number of Re atoms in the 1NN (first nearest neighbor) shell of the vacancy and saddle point, the vacancy formation energy and migration energy can be estimated. Since the interstitial atom has a certain orientation, the distribution of the atoms around it is anisotropic. To estimate the interstitial formation energy, it was necessary to count the number of Re atoms at the tensile and compressive sites at the 1NN shell around the interstitial. The interstitial motion was three-dimensional (3D) in Mo-14 Re. At 1200 K, the diffusion coefficient of Re atom was a little higher than that of Mo atom, which could lead to the segregation of Re atoms at defect sinks and the formation of Re-enriched phase. It is possible to investigate the longer-term evolution of microstructure using cluster dynamics (CD) or kinetic monte carlo (KMC) techniques based on these results.

Engineering Mn3Ga/GaAs interfaces: a first-principles study on energetic stability and magnetic anisotropy

Mn3Ga-based ferrimagnets have emerged as a promising platform for energy-efficient spintronics. However, the challenge of identifying an appropriate substrate with minimal lattice misfit for the growth of high-quality Mn3Ga films while achieving the desired interfacial magnetic properties persists. Here we investigate the interfacial energetic stability and magnetic anisotropy at the Mn3Ga/GaAs interface through first-principles electronic structure calculations. Four types of interface models based on different configurations, including MnMn/As, MnMn/Ga, MnGa/As, and MnGa/Ga, are systematically examined. Our findings reveal that the MnGa/Ga interface exhibits the largest perpendicular magnetic anisotropy (PMA) but is energetically the least favorable. Conversely, the MnMn/As interface is energetically the most favorable but demonstrates a lower interfacial PMA. Our calculations align well with the experimentally observed formation of the secondary phase Mn2As. This study deepens our understanding of the interfacial properties in Mn3Ga/GaAs and offers some insights for their optimization through strategic interfacial engineering.

Selective adsorption and sensing mechanism of ZnFe2O4 (111) surface towards toxic gases:A first-principles study

ZnFe2O4 possesses an excellent gas-sensing performance, but its sensing mechanism towards different toxic gas molecules requires further exploration. In this study, the competitive adsorption and sensing properties of several toxic gases (NO2, NO, SO2, CO, H2S, and NH3) on the ZnFe2O4 (111) surface were investigated using density functional theory (DFT) calculations. The adsorption energy, charge transfer (QT), occupation function, adsorption free energy, charge density difference (CDD), and density of states (DOS) were compared. The results reveal that the ZnFe2O4 (111) surface exhibits obvious adsorption for NH3, H2S, NO2, and H2O, besides the selectivity of NH3 molecule is highest. Strong chemical interactions exist between these harmful gas molecules and the ZnFe2O4 (111) surface. This study offers valuable theoretical insights into the selective adsorption and sensing mechanism, contributing to the development of high-performance gas sensors to detect toxic gases.